You can use this page to update the firmware of some of our devices. This can add functionality and solve custom problems.
1. Choose your device and the needed software version.
2. Connect to the device over USB.
The connection shall be made in the off state with a MicroUSB-B cable.
If your computer will not install drivers automatically, you can use this packet from the vendor: FTDI VCP drivers
3. Upload the firmware.
Click on the Update button, the choose the proper device. Then click on "OK", and when the synchronisation line starts loading, press the reset button.
Successful synchronisation will be signaled by a loud beep, then the update starts.
Click the Update button to start uploading.